Water is always a bone of contention between farmers and environmental activists. Today, everyone advises proper and careful use of the water available to you, especially if using it for farming any crops, trees, or even flowers.
Since sprinklers for overhead irrigation have been in use for a long time, it has become difficult to change farmers’ minds about its dangers.
First, it is a potent source for soil erosion, depleting some of the best farming soil off your land.
If asking what a drenching hose is, it is one of the most efficient ways of flooding your parcel of land without causing erosion or water waste. It is a faster means of getting water to your plants. However, not many know of its existence, let alone how to possibly use a drenching water hose.
Table of Contents
Understanding What A Drenching Tube Is!
The base material of the drenching tube is made of rubber, a highly porous material. Porous means that it allows water to seep through and out into the environment. Once you arrange it over your plants, they receive continuous drenching for a period that goes deeper and lasts longer compared to sprinklers.
Since these do not spray water particles onto the plant leaves, they are more superior to farmers for irrigation. Also, they prevent plant diseases that may occur as a result of the overhead water feeding system.
What the advantages of using a drenching pipe?
Since it is a new mode of irrigation, there are many advantages attached to using a drenching hose. These include:
Efficient water use
Water seeps through the hose and deep into the soil. Spraying loses more water into the atmosphere while hosting ensures all water seems into the soil. Also, since water seeps at a slow rate, there are no erosion or water waste cases through puddle formation.
Protects against fungus
Water encourages the growth of fungi, a condition that affects many plant foliage. Using a porous pipe to water reduces the amount of water that leaves, and other plant parts come into contact with it. Thus, your crops or garden flowers have protection from fungal diseases.
No weeds
Water distribution only aligns with spaces where plants are growing. All other parts receive very little, thus continuous withering and falling of weeds on the farm.
Time Saver
Water the plants, complete your house chores, feed the pets, and any other animal on the compound. The only way to accomplish all these is through using a hose.
Convenient and straightforward in use
Watering the plants is simple, and all you have to do is plug the hose into the tap, switch it on, and lay it across the garden. However, coming up with a working schedule and watering pattern can pose a challenge. You can solve the problem once you start using it.
Installing the Soaker/ Drenching Pipe
Every device or equipment requires full installation before you begin to utilize it. The drenching pipe follows specific guidelines provided in its packaging for installation. An additional kit also comes offering variable instruction on installation and how best to do it. However, all of them are straightforward, and all you need is to bring the different pieces together for assembly.
Measure your garden dimensions and identify what length of the drenching pipe or hose you will need. Measure the pipe and cut a similar length. Cover one side of the drenching pipe using a plug for the holes, especially if the design you come up with does not require a loop. Pull the remaining end and connect it to the tap. However, if it requires a loop, use a tee connector to make the necessary connectivity.
Garden scissors may come in handy during the installation process. They make comfortable and clean cuts on the porous piping. If unable to access these, consider using wire cutters. Pliers are essential items in an assembly process, including the hose set-up. It tightens and holds all essential apparatuses together. Arrange to have all the essential tools for the assembly before you start. It helps identify what goes where and how.
Using the Soaker or Drenching Pipe
After the installation process, assess the design you have put together for your garden. Ensure everything is holding in place before you put it out in the garden. However, it is essential to review any information available on how to use this specific irrigation system.
First, ensure it runs across the garden
Plants that grow around the year require special attention when it comes to water usage. If you have them on your farm, consider placing the drenching pipe approximately 4 inches from the plant stems. The four inches only apply to plants with short or thin stems.
The type of soil in your farm may pose a challenge to the effectiveness of this mode of irrigation. Clay soils tend to lose water fast than any other soil type. Experiment with the available components to identify a pattern that works for you and your vegetation. Remember, do not leave the pipe for long under extreme sunshine.
Second, reset the faucet
Drenching hoses carry one of the best technologies allowing water regulation when irrigating the farmland. The control mechanisms ensure that the hose remains intact even under pressure and resets if it is too high. The speed at which the drips come from the hose is enough to determine the best water pressure to use.
However, consider the direction the hose is delivering the irrigation water. If going uphill, you may want to add to the length and up the pressure a bit to cover the distance and gravity. You will learn how best to use the drenching pipe with constant monitoring when in use.
Third, running time
Allowing water to run for hours soaking the soil can result in undesirable effects such as too much wetness that can cause plant rot. Therefore, identifying the run time for your plants is crucial to the irrigation system’s overall efficiency.
Water should at least go 4 inches into the soil for typical year-round vegetation. For perennials, the depth approximation is around 12 inches. Efficiency indicates that the ground is wet yet not soggy and water penetrates to those depths for each type of vegetation.
Unique farming or gardening occurrences
Sometimes, gardening involves using non-conventional pieces of land, such as a hillside. Since drenching the soil using a hose simplifies the erosion challenge, it is highly advisable. However, it also presents a challenge regarding water distribution.
Those on higher grounds experience the sun first and thus dry faster than the lower plants. Therefore, paying attention to such small elements will help you increase watering frequencies for higher located plants. Place the hose in a horizontal style when watering to hold the water and prevent it from running.
Conclusion
No more reasons not to employ the drenching hose in your small or large gardens today. All instructions on how best to install and use it are available. Go out and get yours now!
Andrew Wright here, I created Akgardenexpert.com to give people a better product insight before they make that all-important purchase.
This thing was a discovery for me! I’ve never used a hose like this before, but it does a great job of helping my garden out of drought.
This simple system made my garden always fresh and blooming. It’s very simple and worth all the effort. In fact, you just forget to worry about soil moisture.
It seems that this device was invented not for flowers and other plants, but for protecting the territory from rodents with special chemicals. In any case, I like this application better.
I have a clayey patch of land and water disappears too quickly. But this system still works well, it just has to waste a little more water.